Tests of the seaworthiness of seaplane hulls having a high length to beam ratio
dc.contributor.author | Schulz, Edmund F., author | |
dc.contributor.author | Colorado Agricultural and Mechanical College, Department of Civil Engineering, publisher | |
dc.date.accessioned | 2017-09-29T14:31:21Z | |
dc.date.available | 2017-09-29T14:31:21Z | |
dc.date.issued | 1954-05 | |
dc.description | CER54EFS12. | |
dc.description | Includes bibliographical references. | |
dc.description | Prepared for Bureau of Aeronautics, Navy Department through the Colorado A & M Research Foundation. | |
dc.description.abstract | The performance of model seaplane hulls having length-to-beam ratios of 8 and 12 was estimated by observing the motions of heave, pitch and roll while towing the model at various angles and at various speeds into a simple seaway. The models were each towed at three different speeds on five different courses. Two different wavelengths and two different model loadings were used. The data were recorded on 16-mm movie film taken from two cameras one showing a front view and the other showing a side view. The results were somewhat inconclusive since all parameters were not varied through a complete range. Results indicate that increasing the length to beam ratio from 8 to 12 for the same planform area results in a slight improvement of the seaworthiness of the seaplane. The tests also indicate that greater magnitudes of pitching, rolling and heaving exist on courses of 120° to 150° than on courses of 90° and 180° relative to wave travel. | |
dc.description.sponsorship | Under Contract no. NOas 52-1077-c. | |
dc.format.medium | reports | |
dc.identifier.uri | https://hdl.handle.net/10217/184164 | |
dc.language | English | |
dc.language.iso | eng | |
dc.publisher | Colorado State University. Libraries | |
dc.relation | Catalog record number (MMS ID): 991012974429703361 | |
dc.relation | TA7.C6 CER 54-12 | |
dc.relation.ispartof | Civil Engineering Reports | |
dc.relation.ispartof | CER, 54-12 | |
dc.rights | Copyright and other restrictions may apply. User is responsible for compliance with all applicable laws. For information about copyright law, please see https://libguides.colostate.edu/copyright. | |
dc.subject | Seaplanes | |
dc.title | Tests of the seaworthiness of seaplane hulls having a high length to beam ratio | |
dc.type | Text | |
dcterms.rights.dpla | This Item is protected by copyright and/or related rights (https://rightsstatements.org/vocab/InC/1.0/). You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s). |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- CERF_54_12_DIP.pdf
- Size:
- 16.53 MB
- Format:
- Adobe Portable Document Format
- Description: