Show simple item record

dc.contributor.authorAhsanuzzaman, A. Noman M.
dc.contributor.authorKolar, Randall
dc.contributor.authorZaman, Musharraf
dc.date.accessioned2020-01-29T15:32:03Z
dc.date.available2020-01-29T15:32:03Z
dc.date.issued2003
dc.descriptionIncludes bibliographical references.
dc.description23rd annual AGU hydrology days was held on March 31 - April 2, 2003 at Colorado State University.
dc.description.abstractThis article presents a criterion for limiting source dimensions of the instantaneous point source model. The source dimensions are required for applying superposition of the point sources in space to represent the non-point sources. The criterion generates less than one percent error when compared to the existing finite source model. A comparison between the existing point and the finite source models is conducted. It is found that the finite source model does not give acceptable output at all times, if series distribution is used to compute the error function. The front and tail of the concentration breakthrough curve from the finite source model shows uncharacteristic output depending on the source dimension and the distance of the observation point. On the contrary, the point source model generates smooth breakthrough curves at all time.
dc.format.mediumborn digital
dc.format.mediumproceedings (reports)
dc.identifier.urihttps://hdl.handle.net/10217/200002
dc.identifier.urihttp://dx.doi.org/10.25675/10217/200002
dc.languageEnglish
dc.publisherColorado State University. Libraries
dc.publisher.originalColorado State University
dc.relation.ispartofHydrology Days - Department of Civil and Environmental Engineering
dc.rights©2003 Hydrology Days
dc.titleLimiting source dimensions of three-dimensional analytical point source model for solute transport
dc.title.alternativeHydrology days 2003
dc.title.alternativeAGU hydrology days 2003
dc.typeText


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record