González, Juan José, authorRocca, Jorge J., advisorWilbur, Paul J., committee member2016-05-122016-05-121999http://hdl.handle.net/10217/172823The direct generation by electrical discharges of hot and dense plasma columns with large length-to-diameter ratio is of interest for the development of efficient soft x-ray lasers and has resulted in the generation of coherent radiation at wavelength as short as 46.9 nm. This work presents the first experimental results of a new high power density capillary discharge designed to explore the generation of axially uniform plasma columns for the development of discharge pumped lasers at shorter wavelengths. A high power pulsed power generator based on a three-stage pulse compression scheme was developed. The final stage consist of a water dielectric Blumlein transmission line designed to generate current pulses of up to 225 kA with a 10-90 % rise-time of = 10 ns through the capillary load. Argon plasmas generated in polyacetal and ceramic capillaries were studied by means of time resolved soft x-ray pinhole camera images and time resolved XUV spectroscopy. The pinhole images show that the current pulse rapidly compresses the plasma to form a column with a soft x-ray emitting region with a diameter of ≈ 250 μm. Spectra in the 18-23 nm region are observed to be dominated by an ArXV line. The experimental data obtain is in agreement with model computations that suggest these discharge conditions should generate plasma columns of ~ 200-300 μm in diameter with electron temperatures > 250 eV and densities of 1-2x10 20 cm-3.masters thesesengCopyright and other restrictions may apply. User is responsible for compliance with all applicable laws. For information about copyright law, please see https://libguides.colostate.edu/copyright.Laser plasmasPlasma generatorsX-ray lasersPulse generatorsStudy of a high power capillary dischargeText